The following items are currently available. Please contact the dealer shown directly for more information. Tell them you saw the listing on UEN

The number in square brackets [] at the end of each listing is the dealer's stock number. The symbol is a link to pictures and/or detailed specifications for the item.

 21/32" x 120" cc, COLCHESTER MASTIFF LATHE, 1980, Taper attach., 3-9/16" [3164]
   American Machinery Co Inc Newtown CT 203-364-9001 sales@american-machinery.com
 13/32" x 14' cc, Summit, Gap type,16" o/cs, 4" Spdl bore, taper, 15HP, 1010RPM,New 1988 [58179]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 25/32"x150"cc,VDF Wohlenberg,HD Engine W-57,Tracer,steady rest,tail stock,50HP, in/met thrd [58162]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 27/32"x240"cc,J&L,Progress HD,4"bore,465RPM,30HP AC Spdl,Hyd Tracer,46"Ck, Threading,60s [58134]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 12-1/2" MONARCH #10 "EE",DBC 20",BED 39",AUTO FEED************* [63903]
   National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com
 7" x 10" cc, CENTRAL MACHINERY ENGINE LATHE [1917]
   Wenco Machinery Corp Ringwood NJ 888-439-3626 sales@wencomachinery.com
 7"X14"LOGAN TOOLROOM LATHE. [3497]
   Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com
 7" x Leblond, Model 7C 15 x 30 center [2766]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 SOUTH BEND,#C,9"SWING,3"BED LENGTH; 1/2 HP 1/115/60 (1725 RPM) [63946]
   National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com
 9" x 24" cc, HARDINGE, COLLETS, TOOLING, LIGHTED BENCH, 240V [4190]
   Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com
 9" x 28" cc, SOUTH BEND, #CL644A, 3 jaw, 4 jaw, steady, follow, collets [2628]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 9" x 36" cc, HARDINGE,1 HP, 230-3500 RPM, 440V 60/3 Phase, 1967 [21209]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 10" x 20" MONARCH MODEL EE ENGINE LATHE [3948]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
 10"x20" MONARCH EE, Inch/Metric, Sony DRO, 3&4 Jaw Cushman Chucks,tooling,1993 [1154]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 10"x20" MONARCH, EE, Inch/Metric, Solid State Drive, Taper attachment, 1989 [1174]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
10"x20" MONARCH EE, 12.5" swing, Inch/Metric, Solid State Drive, 1985 [1273]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 10" x 20" cc, Monarch, Sony 2-Axis DRO, 8"3-J & 4-H, 1-3/8"Hole, 40-4000 RPM, In/Mm, '72 [1056]
   Adams Machinery Co Lincolnwood IL 847-673-0556 adams@adamsmachinery.com
 10" x 20" cc, SOUTH BEND, [19513]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 10" x 24" cc, SOUTHBEND, [2537]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 10" x 28" cc, SOUTH BEND,Md.A,3" 3-Jaw Chuck,Taper Att.,Cabinet Base [21048]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 10"x36",ALTAS,Bench,6 1/2" 3-Jaw Chuck,Change Gears,1/2 Hp.,115-230, 60/1 [21049]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 10" x 36" cc, ROCKWELL,Cabinet, 50 to 1500 RPM, Vari-Speed, Taper [19402]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 10" SWING, LOGAN, 6" DIA 3-JAW CHUCK, 42" BED, THREADING CAPABILITY, 1/3 HP**** [103147]
   National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com
11" x 18" cc, HARDINGE, HLVH Precision Toolroom Lathe, S/N-HLVH-12427-T, 1986, Tooling, VGC [4329]
   Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com
 11"x 18",HARDINGE, Inch/Metric, Chuck and Toolpost, Coolant, 1981 [1156]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
11"x18" HARDINGE HLV-H, Sony DRO, Chuck, Collets, Excellent, 1987 [1175]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 11" x 18" cc, VICTOR, 618EM, Toolroom, Inch/mm, 130-3000 RPM, 5C Collet, 1996 [20173]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 11" x 24" cc, LOGAN, threading, 3J, SR, RTTP, 115 volts [5510]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 11" x 25" cc, EMCO MAXIMAT, Super 11, 55-2200 RPM, Inch/mm, 2 HP, Clean [21226]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
11" x 33" Standard Modern, inch/mm, 36/1800RPM, tons of tooling, wonderful shape, see video [6048]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 11" x 36" cc, LOGAN, Model 922, collet nose [2233]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 12-1/2" x 20" cc, MONARCH, No. 10EE, Inch/mm, Chucks, Steady Rest, 1995, Clean [21379]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 12" x 20" cc,MONARCH, MODEL 10EE,ENGINE LATHE, [471]
   Highland Machinery Benton Harbor MI 269-926-9600 sales@highlandmachinery.com
12" x 20" cc, Monarch, No. 10EE, 1967, Ser. 49104, 4000 RPM, Solid State, Jacobs Collet Set Up
   Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com
 12" x 24" cc, CRAFSTMAN, 6" OVER CROSS SLIDE, 4 TO 120 TPI [2671]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 LOGAN, 12" swing, 30" cc, collet closer, no threading, 6" 3-jaw [1284]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 12" x 30" cc, LOGAN, 2000 rpm, 2 hp, 3 jaw, faceplate, threading [1398]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
MCILVANIE B40, Ser#662, 230/440V, 3PH, 60HZ, 22 AMP, 30" distance on centers 12" swing over cross slide
   Government Liquidation, LLC Scottsdale AZ 480-367-1300 rhazen@govliquidation.com
 12" x 36" cc, CLAUSING, threading, varispeed, 3J, TD, LOCC, 1982 [5772]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 12" x 36" cc, CLAUSING,Model 6339,7" Over Cross Slide, 1-1/2" Spindle Hole Diam. [2646]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 12" x 36" cc, CLAUSING, MODEL 5914, 360-2000 RPM, 7" SWING OVER CROSS SLIDE [2654]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 12" x 36" cc, Clausing, 5914, Collet Chk, 8" Chk, 1-7/16" Cap, 52-2000 RPM [39145914]
   Adams Machinery Co Lincolnwood IL 847-673-0556 adams@adamsmachinery.com
 12" x 36" cc, SHELDON, 8" 3-jaw, tool post, [2278]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 12" x 40" cc, HARRISON,3-JAW CHUCK [607]
   Pride Machinery Sales Inc Deer Park NY 631-586-5252 sales@pridemach.com
 12" x 40" cc, MORTON no. F1900-AEG, Gap-Bed, * NEW * [8689]
   Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com
12" x 50" cc, MORI-SEIKI, MS1250, A1-6, STEADY REST, FACE PLATE, (2) CHUCKS [8516]
   T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com
 12" x 118" cc, VANGUARD ENGINE LATHE, 2006 (NEW) [2414]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 12" x Logan, logan 12" lathe Model 2556VH 1-1/4" spindle Cabinet base [411]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 12" x Logan, Logan 12" Lathe Model 2556VH 1-1/4" spindle Cabinet base [412]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 13" x 20" cc, RIVETT, MODEL 10205, 7" SWING OVER CROSS, 3500 MAX RPM [2631]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 13" x 28" cc, Harrisson, HARRISON LATHE Model M300 Serial #174092 Swing 13” x 28” Center to Center Large Face Plate Draw Bar 5C Collets 12 Speed Head [2767]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 13" x 28" cc, Harrisson, HARRISON LATHE Model M300 Serial #174873 Swing 13” x 28” Center to Center Large Face Plate Draw Bar 5C Collets 12 Speed Head [2768]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 13" x 30" cc, SOUTH BEND, threading, 3J, TD, SR, toolpost [5724]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
13"x30" Southbend, inch/mm,D1-4, 58-2500RPM,2 chucks,5C collet nose,very very nice, see video [6047]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 13" x 34" cc, TROGLIA, #TPS-8, inch/mm, gap, 3J, SR, FR [2118]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 13" x 36" cc, CLAUSING COLCHESTER, threading, 3J, 4J, LOCC, SR, CL, 1967 [697]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 13" x 36" cc, CLAUSING-COLCHES, Turret Tail Stock [10761]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
13" x 36" cc, Sheldon, 8" 3 jaw chuck, 6" 4 jaw chuck [101387]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 13" x 36" cc, TOS, SU 32, 7" Swing over slide, 3.5-3150 RPM, 3 jaw and collet draw bar, Inch/Metric Threads, hard ways [3642]
   Centra Corp Baltimore MD 410-945-0040 ued@centracorp.com
 13" x 40" cc, American Machine (Republic Lagun), 35 to 2500 rpm, inch - metric, chunks, 5 hp [07086]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 BIRMINGHAM YCL-1340, Engine Lathe, 2 HP, 3J, 4J, 4WTP, NEW (NEW) [5547]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 13" x 40" cc, Birmingham Engine Lathe [294640]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 13" x 40" cc, CLAUSING METOSA, Inch/mm, 75-2500 RPM, Coolant, Nice [21390]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 13" x 40" cc, CLAUSING-COLCHESTER, Inch/mm, 40-2500 RPM, 3 HP, 1994, Nice [20363]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 13" x 40" cc, CLAUSING-COLCHESTER, Inch/mm, 40-2500 RPM, 3 HP, 1994, Nice [20361]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
13" x 40" cc, Clausing-Colchester 2500, 1 1/2" Hole, 8" 4 Jaw, English, Metric, 1994 [8049]
   Turner Industries Inc Grand Rapids MI 616-949-5910 jkraus@turnerind.com
 13" x 40"cc,Clausing,Gear Head,Gap Bed,Hole 1.57",40-2500rpm,(Other sizes available) (NEW) [410001]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 KENT USA KLS-1340 Engine Lathes, 1-1/2" bore, 2 HP, 1 phase motor, NEW (NEW) [5655]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
13" x 40" cc, Takang, 2000 RPM, 3 Jaw, School, 1982 (2)
   Tooling & Machinery of Texas Houston TX 713-699-8987 hescoequip@email.msn.com
 13" x 40" cc, WILLIS MICROCUT LATHE [1950]
   Wenco Machinery Corp Ringwood NJ 888-439-3626 sales@wencomachinery.com
13" x 42" cc, Clausing Colchester, 2500 RPM, T.A., 4-jaw, 1986 (2)
   Tooling & Machinery of Texas Houston TX 713-699-8987 hescoequip@email.msn.com
 13" x 48" cc, CLAUSING, [2536]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 13" x 48" cc, ROMI Mdl 13-5, in/mm, 8" 6 Jaw, 2-Ax DRO, Tailstock, Taper Att. [703]
   Highland Machinery Benton Harbor MI 269-926-9600 sales@highlandmachinery.com
13" x Acra Turn, model 1340 industrial lathe with Acu-Rite digital readout, year 2000
   Ettaco, Inc. Tempe AZ 480-961-5168 equipment@ettaco.com
 13" HARRISON, M300, 3 HP, 4" camlock (NEW) [4294]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 SHELDON #UM-70-P, PROD., 13" SWING, 70" BED LG, 3 JAW CHUCK, 1-1/2 HP [68922]
   National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com
 13" x CLAUSING COLCHESTER, 36" Centers, Cabinet Base, 10" 3-Jaw Chuck [415]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 14" x 22" cc, YANG IRON WORKS,8" 3 JAW CHUCK,DORIAN TOOL POST,COOLANT [544]
   Highland Machinery Benton Harbor MI 269-926-9600 sales@highlandmachinery.com
 14" x 23" cc, OKUMA, 2000 RPM, 6" 3-JAW, ALORIS, S/N 1462 [1314]
   C & A Machinery Norwood MA 781-440-0983
 14.5"/23"/8.5" x 32" TAKISAWA Engine Lathe, 1-1/2" Spdl Hole, 8" 3-Jaw Chuck [43186]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 14" x 36" cc, AMES, ANTIQUE LATHE MADE IN MASSACHUSETTS, U.S.A. [2634]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
14" x 36" cc, LeBlond, 10" 3-Jaw Chuck, Taper Attachment, Inch Threading, Chip Pan [o27371]
   Perfection Machy Sls Inc Elk Grove Village IL 888-212-7731 sales@perfectionmachinery.com
 14" x 36" cc, Maxturn Engine Lathe, [294639]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 14" x 40" cc, ACER, #1440G, New (NEW) [4426]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 BIRMINGHAM CT-1440 Lathe (NEW) [4035]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 BIRMINGHAM #YCL-1440GH Engine Lathes, 1-1/2" bore, 3 HP, NEW (NEW) [5626]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14" x 40" cc, BIRMINGHAM, Socs 8",Sob 14",Sog 7.8",2Hp,Bore 1.5",(other models avail) (NEW) [460004]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 14" x 40" cc,Birmingham,Socs 8-5/8",3Hp,Bore 1.5",Spnd 45-1,800rpm,D1-4,other models avail (NEW) [460005]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 14"x40"cc,CLAUSING,SOB 14",SOCS 8.66",SH 2.04",Nose D1-6,6/4HP,(Other sizes available) (NEW) [410008]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 Clausing Metosa,14"x40"cc,SOC13.2",SOCS 8.07",SH1.65",4MT,3/4.5HP,(Other sizes available) (NEW) [410002]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 KENT USA KLS-1440 Engine Lathes, 1-1/2" bore, 3 HP, NEW (NEW) [5624]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14" x 40" cc, KINGSTON, HQ-1440, NEW (NEW) [4168]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14"x40"cc,KINGSTON HQ1440,Sob14",Socs 8-3/16",SH 2",12 Spd,5 Hp,(other sizes avail) (NEW) [450003]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 14" x 40" cc, LEBLOND REGAL LATHE [1012]
   Wenco Machinery Corp Ringwood NJ 888-439-3626 sales@wencomachinery.com
 14"x40"cc,Millport,Gear head,1 1/2"SH,Eng/Metric,8" 3jaw,10" 4jaw,faceplate, stdyrst,5HP,80's [101246]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 14" x 40" cc, NARDINI, D1-5, 32-2500 rpm, 6/4 HP, NEW (NEW) [4105]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14" x 40"cc, SHARP, #1440V, digital variable speed, D1-4, 1.5" bore, NEW (NEW) [5272]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14" x 40" cc, SUMMIT, NEW (NEW) [4599]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14" x 40" cc, TOR, MODEL 5, 1970, 6" 3-JAW, TAILSTOCK, 1800 RPM, 1.25" BORE [42041]
   Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com
14" x 40" cc, WILLIS, 2008, (NEW) [21297]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
14" x 40" cc, WILLIS, 2008, (NEW) [21338]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
14" x 40" cc, WILLIS, 2008, (NEW) [21415]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 14" x 44" cc, CLAUSING, MODEL 6913, SWING OVER CROSS SLIDE 8-1/4",43 TO 1650 RPM [2655]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 14" x 60" cc, Hercules, Ajax, gap bed, taper, inch-metric, 25-1500RPM [08175]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
14" x 60" cc, Monarch, older but good running condition, 3 jaw chuck.
   R S G International Inc Chicago IL 847-681-0231 rsginter@aol.com
 14" x 60" cc, SUMMIT, NEW (NEW) [5723]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 14"/23" x 60" cc, Zubal With Gap, New 1982, #3696 [3696]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
14 1/2" x 40" cc, CLAUSING, No. 1500, 3-Jaw & 4-Jaw Chuck [11139]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
 14 1/2" x 48" cc, CLAUSING, Mdl 1501, 10" 3-Jaw, Newall 2-axis DRP, tooling [295915]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
14 1/2" x 54" cc, LODGE & SHIPLEY, No. AVS 1408, Taper, 3-Jaw, Metric [10629]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
 15.25"/24"/8.25" x 30" JET Engine Lathe, 68 to 1800 RPM, 8" 3-Jaw Chuck [43311]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
LE BLOND,Dual Drive [21408]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 15" x 30" cc, LEBLOND Regal, Inch/mm, 45-1800 RPM, Taper, Chucks, 7.5 HP, 1985 [21339]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 15" x 30" cc, LEBLOND Regal, Inch/mm, 45-1800 RPM, Taper, 7-1/2 HP, 1985, Clean [21407]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
15" x 30" cc, LeBlond, 8” Chuck, LeBlond “Regal” Engine Lathe w/ Chucks & Tooling, 15” x 30 [49736]
   Used Machinery Sales Inc Elk River MN 888-UMS-SELL machinery@cnctool.com
15" x 30" cc, LeBlond Makino, Regal, DRO, Chuck, Tooling, Inch/Metric, 1985
   Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com
 15" x 32" cc, Leblond, Servoshift, Inch/Mm, 2 Cushman Chks, Well Tooled, Fantastic [6007]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 15" x 32" cc, Leblond, 28-1800rpm, L-O, well tooled, taper attachmt, low hour [6015]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 15" x 34" cc, LEBLOND REGAL, 8" OVER CROSS SLIDE, 1-3/4" SPINDLE HOLE [2670]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
15" x 40" cc, CINCINNATI HYDRA, MDL 15, 980 RPM, 10" 4-JAW & JACOBS COLLET CHKS, 5 HP, STEADY REST
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 15" x 40" cc, HARRISON,MDL:M350, S/N:6017 [2388]
   Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com
 15" x 40" cc, Leblond, Servo Shift, 45-1800 RPM, 5 HP, Taper Att, Ways are Great [5294]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 15" x 48" cc, CLAUSING, 1966, 5C COLLET [206604]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 15" x 48" ROCKWELL Engine Lathe, 1-1/8" Spdl Hole, 40 to 1600 RPM, 4-Jaw Chuck [44457]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
15" x 48" cc, Rockwell, 15" x 48", 4 Jaw Chuck, Tail Stock, Chip Pan, 1-1/8" Hole [2703614]
   D & D Industries Inc Holland OH 419-866-6894 sales@danddindustries.com
 15"/19"x50" CLAUSING COLCHESTER "TRIUMPH", 10 HP,in/mm, DRO,2" hole, Unused 2005 [1304]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 15" x 50" cc, CLAUSING COLCHESTER, Inch/mm, 1992, Excellent [21456]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 15" x 50" cc, COLCHESTER, gap, inch/mm, 3J, SR, TA, 1990 [677]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 15" x 54" cc, Tray-Top Cintilathe, [21440]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 15" x 54" cc, LEBLOND, "Servo Shift", inch, 3 HP, 4J, SR, TD, QCTP, 1967 [4242]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 15" x 54" cc, LEBLOND, 1966, [2672]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 15" x 54" cc, LEBLOND, 1982,INCH/METRIC THREADING,3 & 4 JAW CHUCK,TOOL POST [603]
   Pride Machinery Sales Inc Deer Park NY 631-586-5252 sales@pridemach.com
15" x 54" cc, LEBLOND Regal, S/N-11C702, 1978, Servo Shift
   Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com
15" x 54" cc, LeBlond, Servo-shift, 60-2400RPM, D1-6, 7.5HP, inch/met, From Research [5885]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 15" x 54" cc, LeBlond, Regal Servo-Shift, In/Met, 45-1800 rpm, DRO, 10" Chk, 1979 [1440]
   A Green Co Inc Worcester MA 508-791-6800 sales@agreenco.com
 15" x 60", CAMTAK, 10" 3 JAW CHUCK, 45-1400 RPM, 2" HOLE THRU SPINDLE [3907]
   Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com
 15" x LeBlond, 10" Chuck, Leblond 15" x 54" Engine Lathe, 1960's, MT#3, FOB: Elk River, MN [944214]
   Used Machinery Sales Inc Elk River MN 888-UMS-SELL machinery@cnctool.com
 15 1/2" x 54" cc, Lodge & Shipley, 10" Chuck, Lodge & Shipley, 1,800 RPM, 2-17/64" Hole Thru Spindle, Steady Rest, FOB: Minnesota [944282]
   Used Machinery Sales Inc Elk River MN 888-UMS-SELL machinery@cnctool.com
 16" x 30" cc, HENDEY, [1862]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 16" x 30" cc, MONARCH, Model 14"WAA, 16 Spindle Speeds 12-487RPM [2440]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 16"x30",MONARCH,Series 612 Model 1610T Toolmakers, 2" hole, 3&4 jaw, steady,1962 [1155]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 18.5" x 30" cc PRATT & WHITNEY, 1-11/16" Spdl Hole, Threading, 7-1/2 HP, STK#7709 [28113]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 18.5" x 30" cc PRATT & WHITNEY, 1-11/16" Spdl Hole, Threading, 7-1/2 HP [28113]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 16" x 40" cc, AMERICAN,14"3-jaw chuck,coolant [597]
   Pride Machinery Sales Inc Deer Park NY 631-586-5252 sales@pridemach.com
 BIRMINGHAM YCL-1640, Engine Lathe, 7.5 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5505]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 16" x 40" cc, Harrison, Harrison M400, 16x40 Engine Lathe 1980, [48983]
   Used Machinery Sales Inc Elk River MN 888-UMS-SELL machinery@cnctool.com
 16" x 40" cc, MORTON, FEL 1640HG, 70-1800RPM SPINDLE, POWER FEED, 1999 [4009]
   Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com
 16" x 40" cc, NARDINI, D1-5, 32-2500 rpm, 6/4 HP, NEW (NEW) [4409]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 16" x 40"cc, SHARP, #1640LV, digital variable speed, D1-8, 3" bore, NEW (NEW) [5270]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 16" x 40B"cc, SUMMIT, NEW (NEW) [4917]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 16" x 40" cc, Supermax, 2 1/16" Bore, Tailstock, 5HP, 2,000 RPM [292011]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 16" x 40" cc, TOS, #SN-40A, 23.5" Swing in Gap, In/Met, T.A., Chk, 1985 [358]
   A Green Co Inc Worcester MA 508-791-6800 sales@agreenco.com
 16"x42"cc,Okuma,LS Engine,Taper,2k RPM,2" Spdl Hole,12"Ck,10" gap,10HP,Inc/Met thrd,1964 [58167]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 16" x 43" cc, SUPERMAX, 1992, [2673]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
16" x 54" cc, Monarch, 7-1/2 HP, 3 & 4-Jaw, Steady, Nice, 1969
   Machinery Sales Co Inc Memphis TN 800-932-8376
16" x 58" Monarch #K, D1-6, 28-1200rpm, 7.5HP, taper att, good [6019]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 16-1/2" x 60" Harrison, No. M400, 40-2000 RPM, Inch/mm, 10 HP, 1979 [16730]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
16" x 60" cc, SIDNEY HERRINGBO, Taper, 3-Jaw Chuck [10624]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
 16" x 60B" cc, SUMMIT, NEW (NEW) [4819]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
16" x 60" cc, Tos SN40C, 3-jaw, Steady Rest, 5C lever collet closer, travadial,1990s
   Dominion Air & Machinery Co Roanoke VA 800-476-2882 gauvin@dominionair.com
16" x 72" cc, American, "Pacemaker", 12" 3-Jaw Ck, Taper, 1000 RPM Max, 4-Way TP, 1943, Runs Good
   Foster Machinery Company Inc Charlotte NC 704-847-9449 sales@fostermachinery.com
 16" x 78" cc AMERICAN, 1-3/4" Spdl Hole, Threading, Taper Attach, 15 HP,STK#7737 [28157]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 16" x 78" cc AMERICAN, 1-3/4" Spdl Hole, Threading, Taper Attach, 15 HP [28157]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 16" x 80B" cc, SUMMIT, NEW (NEW) [4916]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
16" x 80" cc, TOS SN 40, chucks, steady rest, 2" spindle bore, metric/inch threading
   O.P.T. Machinery & Equipment Vancouver BC 800-863-6168 OPTmachinery@telus.net
 16"x80"cc,Tos,25"gap,10" 3-jaw & 4-jaw,face plate,travadial,inch & metric thread,steady rest,22-2000 RPM [101108]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 16" x 132" LEBLOND HEAVY DUTY 16 ENGINE LATHE, Taper, [4383]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
16"/24" x 200" cc, South Bend, 3 HP, Roll Grinding Attachment, For Rubber Rolls, Tailstock (2)
   Tooling & Machinery of Texas Houston TX 713-699-8987 hescoequip@email.msn.com
 SOUTHBEND MODEL A, SWING 16", BED 6", BETWEEN CENTERS 33", 9" - 3 JAW CHUCK [107739]
   National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com
 ACER 17" Series Lathes (NEW) [4008]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 17" x 40" ACER DYNAMIC 1740G, WITH 2AXIS NEWELL DRO, 3-jAW, COOLANT, STEADY [8351]
   T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com
 17" x 40" cc, ANDRYCHYOW, 2.1" HOLE, 1600 RPM, 7.5 HP, IN/MM, 10" 3-JAW, STEADY REST, 1987 [8029]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 17" x 40" cc, CLAUSING, [19566]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 17" x 40" cc, CLAUSING-COLCHESTER, Inch/mm, 1600 RPM, 3" Hole, Chucks, 10 HP [21293]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 KENT USA 17" x 40" Engine Lathes, 3-1/8" bore, 7.5 HP, NEW (NEW) [5364]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 17" x 43" cc, KINGSTON, Model HJ-1100, NEW (NEW) [4169]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
17"x54"cc,Monarch,1 5/8"S.H,8" 3Jaw,13" 3Jaw,Full Set of 2-J Collets,Collet Nose Adapter,'57 [101390]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 17" x 60" cc, BRIDGEPORT ROMI,2,120 RPM,TAPER,3" HOLE,SR,FR,COOLANT [667]
   Pride Machinery Sales Inc Deer Park NY 631-586-5252 sales@pridemach.com
 17" x 60" cc, BRIDGEPORT ROMI,TAPER, 12" 3-JAW, 10" OVER C/S, STEADY [48977]
   Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com
17" x 60" cc, CLAUSING-COLCHES, 3" Hole, 3-Jaw & 4-Jaw Chuck, Metric [10831]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
 17"/10" x 60" cc SOUTHBEND, 2-1/4" Spdl Hole, 6-1/2" Steady Rest, 10 HP, STK#7792 [28227]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 17"/10" x 60" cc SOUTHBEND, 2-1/4" Spdl Hole, 6-1/2" Steady Rest, 10 HP [28227]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 17" x 67" cc, KINGSTON, Model HJ-1700, NEW (NEW) [4170]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 17"x80" CLAUSING COLCHESTER, 10 HP, Inch/Metric, 3" Hole, Chuck, 1970 [1278]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 17"/28" x 80" cc, CLAUSING COLCHESTER, Gap, Inch/mm, 3" Hole, Taper, SR, Chucks [21269]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 17" x 80" cc, CLAUSING-COLCHESTER, Inch/mm, 1600 RPM, 3" Hole, 10 HP [20493]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 17" x 80" HARRISON MODEL M400 ENGINE LATHE, 10 HP, 12"3-JAW CHUCK, THREAD DIAL [4193]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
17" x 80" cc, Leblond, 25-1000 rpm, 5HP, 17" face plate, very clean, low hrs [5341]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 17" x 80" cc, TURNMASTER, 1970'S, STEADY REST, TOOLPOST [260897]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 17" x 100" cc, CLAUSING, 3-JAW, STEADY REST, ALORIS TOOL POST, S/N 7/0223/13997 [1256]
   C & A Machinery Norwood MA 781-440-0983
 17" x 120" cc, Southbend, 3 & 4 Jaw Chucks, Inch/Metric, Tail Stock [250366]
   D & D Industries Inc Holland OH 419-866-6894 sales@danddindustries.com
 17" x South Bend, South Bend CL117C 6 ft bed with taper chuck and 3 jaw chuck steady rest and tailstock. [416]
   Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com
 17.75"/10.75" x 78" cc LEBLOND, Feeds, Threading, 4-Jaw, Taper Attach, 5 HP, STK#4615 [25599]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 17.75"/10.75" x 78" cc LEBLOND, Feeds, Threading, 4-Jaw, Taper Attach, 5 HP [25599]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 18"/25"x123" MAZAK, 10 HP, 3.125" Hole, In/MM, Taper, Chuck, Steady, Excellent [1321]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 18" x 30" cc, Lodge Shipley, 1610, 14-1160RPM, chucks, 15HP [08289]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 16"-18"30" MONARCH ENGINE LATHE [8953]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
 18" x 36" SIDNEY Engine Lathe, 3-Jaw Chuck, Taper, Tail Stock, Tool Post [42861]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 18" x 40" HWACHEON GAP BED ENGINE LATHE, HL460G, NEW 2000, NEWAL DRO [8546]
   T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com
 18" X 40" HWACHEON LATHE MODEL HL460G, NEW 2000, SONY MAGNASCALE DRO [8547]
   T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com
 18" x 40" cc, POWERTURN (NEW) [9433]
   Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com
18" x 40" cc, POWERTURN (NEW) [10002]
   Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com
 18" x 42" Leblond, 11" SOS, L-0, 20-670rpm, 3hp, 2 chucks, taper att, low hrs [6026]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
18" x 54" cc, CINCINNATI, Tray Top, 5 HP, 3-Jaw, Chuck [10518]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
18" x 60" cc, AMERICAN, [11008]
   Niblock Machinery Inc Elkhart IN 574-264-3177 niblockmachinery@michiana.net
 18" x 60" cc, BIRMINGHAM, Bed width 16",10Hp,16-1600rpm,3-3/16"bore,(other models avail) (NEW) [460001]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 18" x 60" cc, Century/McIlvanie, 1974, 37-1500 RPM, 7.5 HP, Taper Attachment, Very Nice [5170]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
18"/10"x60", Ecoca Mdl 18X60B-EL, 2 Ax w/Mitsubishi PC-1860 CNC Cntrl, 3k RPM, 10 HP, 2-1/4"Bore, '01
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 18" x 60", IRON FLOWER, gap, inch/mm, 3J, 4J, SR, FR, 4WTP, CL, Trav-A-Dial, 199 [5692]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 18" x 60" cc, LeBlond, Leblond Regal Engine Lathe 15" x 54" [10603]
   A & A Machinery Sales Inc Morrisville PA 215-428-1100 aasales@aamachinery.com
 18" x 60", POWERTURN no. 1860, ** NEW ** [8810]
   Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com
 18-1/2"x 78"cc, Monarch, 700 RPM, Cam Lock, 3-4 Jaw Chucks, Steady Rest, Taper [20611]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 18" x 78" cc, Sidney, Geared Head, 12" 3-Jaw, 15 HP, Taper, Thread, Tailstock, Steady Rest [20054433]
   The Daniluk Corp Oklahoma City OK 888-745-6647 MWest@Daniluk.com
 18"/26" x 80" ICOCA, Gap Bed, 20-2000 RPM, Inch/mm, Taper, Coolant, Clean [19640]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
18"x 14' LEBLONDE, 12" 3 Jaw chk. [289619]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 18 1/2" x 30" cc, Monarch, 10” Chuck, Monarch, 1,000 RPM, 1-5/8” Hole Through Spindle, 5HP, $3,450 [47344]
   Used Machinery Sales Inc Elk River MN 888-UMS-SELL machinery@cnctool.com
19" x 30" cc, American Pace, L-2,17-1000RPM,7.5HP, 15" Chuck, Taper Att, Very Good [5196]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 19" x 33" cc, CADILLAC (YANG), inch/mm, CL, 10 HP, 2-9/32" bore, 1997 [5785]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 19" x 54", LEBLOND, Servo-Shift, 25-1000 RPM, Inch/mm, 3" Hole, 10 HP, DRO, 1980 [20945]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 19" x 54", LEBLOND, Servo-Shift, 25-1000 RPM, Inch/mm, 3" Hole, 10 HP, DRO, 1982 [20954]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 19" x 54" cc, LEBLOND REGAL, 1979, INCH/METRIC, 12" 3-JAW & 12" 4-JAW, ACU-RITE [47798]
   Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com
19" x 54" cc, LeBlond Regal Lathe, 1965
   Robert F Brown Machinery, Inc Warren MI 586-755-4040
 19" x 54" cc, Leblond, 12" Chuck, Inch/Thread, Chip Pan, In Plant, 1984 [026997]
   Perfection Machy Sls Inc Elk Grove Village IL 888-212-7731 sales@perfectionmachinery.com
 19" X 60" AMERICAN 1454 HEAVY DUTY LATHE [3598]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 19" x 60" cc, BIRMINGHAM, NEW (NEW) [4179]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 19" x 60" cc, LE BLOND, 1969,TAPER,3 JAW [4985]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
19" x 60" cc, Summit, 1981, 4.25" Spindle Hole, 4 Jaw, Threading, Taper Attach, Steadyrest, [3500]
   On-Line Machine Tool Co Porter TX 281-482-1771
19" x 62" Lodge & Shipley, 20-1600 infin var RPM, 20hp, taper att, from Navy, low hr, see video [6044]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
19" x 64" American Zip Shift, 11.5" o/slide, 15-1630RPM,20hp,taper att, from def stor, see video [6022]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
19" x 72" cc, Cincinnati, 3 & 4 Jaw, Risers, Coolant, 1974
   Machinery Sales Co Inc Memphis TN 800-932-8376
19" x 78" POLAMCO TARNOW ENGINE LATHE, MODEL TUJ-50, TAPER, 16" 4-JAW, 1988 , [4362]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
19" x 80" cc, LeBlond Regal, 3" Hole, 1600 RPM, TA, 1980
   Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com
 SUMMIT 19-4 x 80" Lathe, NEW (NEW) [4039]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
19" x 80" cc, Summit, chucks, taper-attachment, steady rest
   O.P.T. Machinery & Equipment Vancouver BC 800-863-6168 OPTmachinery@telus.net
19" x 80" cc, Summit, 19" x 80" SUMMIT ENGINE LATHE, 27" SWING IN GAP, 4.125" SPINDLE BORE, STEADY REST, FOLLOW REST, CHUCK, IN/MM THREADING [8199]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 19" x 102" cc, LeBlond, Regal, 1-49/64" Hole, 25-1000 RPM, Steady Rest, Quick Change [61227196]
   Adams Machinery Co Lincolnwood IL 847-673-0556 adams@adamsmachinery.com
19" x 102" cc, LeBlond, No. 1610, H.D., 20 HP, 2250 RPM, T.S. Feed, 3-Jaw Chk., S.R., 1961 [5488]
   Turner Industries Inc Grand Rapids MI 616-949-5910 jkraus@turnerind.com
 19" x 108" cc, CMC, 19” x 108” CMC HEAVY DUTY PRODUCTION ENGINE LATHE QUOTE# 58-187Z MODEL/TYPE: Model: 19X108 GH AGE: 1950’s SPECIFICA [58187]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 19" x 108" cc, LeBlond Regal,Servo-Shift,Taper,Threading,DRO,Stdy Rests, 1977, [21712]
   Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com
 19" x 144" LANG, 2483 RPM, Electrofeed, Taper [4410]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
 DAINICHI, No. F25, FANUC 21T, 19"SWING OVER BED, 14"SWING OVER CARRIAGE, 1998, [3706]
   Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com
19" x 3/8" Bar Capacity, Leblond [291475]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 19.5"/12" x 8'6" cc AMERICAN, 1-3/4" Spdl Hole, 12" 4-Jaw Chuck, 10 HP, STK#11047 [15570]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 20" x 40" cc, BIRMINGHAM, DLC-2040, 4-1/8" bore, 10 HP, NEW (NEW) [5627]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 20" x 48" cc, American, 20 HP 18" Chuck Steady Rest Thrdng Tlstck,2-Axis, #206 [206]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
 20" x 49" cc, Monarch, 20CM, 16-700RPM, 18" chuck 4 jaw, hardways, 25HP [08288]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 20" x 54" cc, HENDEY, 13" Swing Over Cross Slide, 36 Spndl Speeds 13 to 1500 RPM [2499]
   Wheeler Machinery Sales Huntington Park CA 888-589-6721 sales@wheelermachinery.com
 KENT USA 20" x 60" Engine Lathes, 3-1/8" bore, 7.5 HP, NEW (NEW) [5362]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 20" x 60B" cc, SUMMIT, NEW (NEW) [4086]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 20"/28" x 60" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New (NEW) [20016]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20"/28" x 60" cc, VANGUARD, 10-1400 RPM, Inch/mm, DRO, S.R., Chucks, 10 HP, New (NEW) [20825]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20" x 60"cc,Wafum,Tur-50,1800 RPM,2-3/4"Dia bore,D1-8" spdl,15HP clnt,Aloris Tooling,'81 [58168]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
20" x 60" cc, Webb, 29" Sw in Gap, 1350 RPM, 2-1/8" Hole, 4-Jaw Chuck [11294]
   NS Machine Corp Ankeny IA 515-964-1290 sales@nsmachine.com
 LAGUN LIBERTY, 20" x 65", LL-EC-2065, 2.04" Bore, 40-2200rpm, 7.5hp, in/mm, Gap (NEW) [422]
   Highland Machinery Benton Harbor MI 269-926-9600 sales@highlandmachinery.com
 20" x 72" Cincinnati Engine Lathe,taper attachment-3 & 4 jaw chuck. steady 1966 [12371]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
 20" x 72" MONARCH SERVOSHIFT ENGINE LATHE, 15" 3-JAW CHUCK, COOLANT, 1973 [4523]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
 20"/11.25" x 78" cc AMERICAN, 1-3/4" Spdl Hole, 14" 4-Jaw Chuck, 10 HP,STK#16440 [32246]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 20"x78"cc,American "Style C 2013",Inch Thrding,Taper Attach,Chuck(s),Stdy Rest [17534]
   Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com
 20" x 80" cc, BIRMINGHAM, DLC-2080, 4-1/8" bore, 10 HP, NEW (NEW) [5482]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 BIRMINGHAM YCL-2080, Engine Lathe, 10 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5560]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 20" x 80" cc, H.E.S., 1970, (2) STEADY RESTS [256103]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 20" x 80" cc, Polamco, TUR-50, Hollow-Spindle, Taper, 1800RPM, 15HP, Threading, 1979 [58183]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 20" x 80" cc, SAMSTAR GEARED HEAD ENGINE LATHE, NEW 1997 NICELY TOOLED [8592]
   T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com
 SUMMIT 20" x 80"B Lathe, NEW (NEW) [4040]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
20" x 80" cc, Standard Modern, 2002, 3-1/16" Spindle Bore, 15" 4 Jaw, Threading, Taper, (2) SR [7832]
   On-Line Machine Tool Co Porter TX 281-482-1771
20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2656]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2657]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2658]
   Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com
 20"/28" x 80" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New (NEW) [20506]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20"/28" x 80" cc, VANGUARD, Gap, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks (NEW) [20086]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20"/28" x 80" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New (NEW) [20087]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20"/27" x 80" cc, VICTOR, Gap Bed, Inch/mm, 25-1500 RPM, S.R., Chucks, 7-1/2 HP [21355]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
20" x 82" cc, Axelson, 308-1127 RPM, 10 HP, 21" 4-Jaw Chuck, Taper Att., Serial #4207, 1953
   Metalworking International LLC Jefferson Hills PA 561-843-6140 mic3@attglobal.net
 20" x 91" cc, AXELSON, [43296]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 20" x 96" cc, SPRINGFIEL, MDL 2013, 2" HOLE, 20-1009 RPMN, 2-STEADYS, 12" 3-JAW CHK, RAPID TRAVERSE [7880]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 20" x 102" cc, Lodge & Shipley, 25" swing, 14-1160RPM, taper, 3-jaw, 10HP [06273]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 20" x 120" cc, BIRMINGHAM, DLC-20120, 4-1/8" bore, 10 HP, NEW (NEW) [5489]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 BIRMINGHAM YCL-20120, Engine Lathe, 10 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5561]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 SUMMIT 20" x 120"B Lathe, NEW (NEW) [4544]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 20"/28" x 120" cc, VANGUARD, 10-1400 RPM, Inch/mm, 4" Hole, DRO, Tooled, New (NEW) [20148]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20"/28" x 120" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R. Chucks, New (NEW) [19997]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 20" x 126" Monarch, 15 HP,Quick Change Geared Head, Taper, 1980 [2836]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
20" x 200" cc, Lansing, 28-1/2" in Gap, Inch/Metric, 1500 RPM, 4-1/8" Hole, Chucks & Steadys, 15HP, 1987
   Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net
 BROWN & ZORTMAN ENGINE LATHE [12095]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
20"Sw, UCIMU, 12' Bed, 20-1270RPM, 18" 4 Jaw Chuck, 10 HP, Taper Attachment, 1980
   Metalworking International LLC Jefferson Hills PA 561-843-6140 mic3@attglobal.net
 20.5" x 72" cc LEBLOND, 1-3/4" Spdl Hole, Taper Attach, 4-Way Tool Post, 20 HP,STK #17676 [32912]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 21" X 36" MODEL S, SPRINGFIELD ENGINE LATHE [3839]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
 21" x 50" cc, OKUMA, 4J, SR, TD, 4WTP, 1970 [1677]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 21" x 57" cc, Okuma, Model LS, 12" 3J, SR, FR, In/met, 4-Way, Clnt, 1969 [1377]
   A Green Co Inc Worcester MA 508-791-6800 sales@agreenco.com
21/27" x 60", MAZAK MARK II,Taper, Chuck, 1500 RPM, 15HP, 1978
   Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com
 21"x60"cc,Okuma,LS Engine,1000RPM,2" bore,10HP,Hyd Tracer,loaded w/tools & access.,1970 [58177]
   Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com
 21"x80"cc,CLAUSING Harrison V550/80,SOB 21-7/8",18-1800rpm,(Other sizes available) (NEW) [410007]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
21" x 80" cc, Kingston, 3" Hole, 4 Jaw, TA, Steady, 1981
   Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com
21" x 80" cc, Mighty-Turn, 3" Hole, Taper, S.R, 3 Jaw, 1994
   Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com
 21" x 80" cc, Ponar Polamco, TUR50, 18-1800RPM, inch-metric, 10HP, 1978 [08163]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
21" x 98" cc,Lodge & Shipley,13"SOS,9-500RPM,10HP,Chuck,Stdy Rest,Taper Att,From Storage [5862]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 21" x 120" cc, Leblond Regal, Servo Shift, 18"4J, 2-3/16"Hole, 27-1080 RPM, (2) Stdy Rests, 1958 [1072]
   Adams Machinery Co Lincolnwood IL 847-673-0556 adams@adamsmachinery.com
 21" x 120" cc, Tarnow, gap bed, model TUJ-50, inch-metric, taper attach, 18HP, 1975 [08164]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 21.5" X 72" CINCINNATI GAP BED ENGINE LATHE [41162]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
22" x 32" cc, Monarch, HD, 2" Spdl Bore, 12-1500RPM, Taper Attachment, From Storage [5860]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 22" x 33" cc, YAM, 1990,1,500 RPM,COLLECT CLOSER,15" BISON CHUCK,5 HP [698]
   Pride Machinery Sales Inc Deer Park NY 631-586-5252 sales@pridemach.com
 22" x 54" cc, Lodge & Shipley,'70, d1-6. 20HP, 21-1740rpm, 3 Chucks, Taper Att, Great [6000]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 22" x 54" cc, Monarch, CM, 20HP, 18" Chck, Taper Att, S.R., 14-600RPM, from Navy, Xlnt [5288]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
22" x 60", American HD, 1965, 3 Jaw Chk, 2500 RPM-Taper, R.Tr. Coolant, Hard Ways, Exc, Serial#77577-65
   Metalworking International LLC Jefferson Hills PA 561-843-6140 mic3@attglobal.net
 22" x 60" cc, LEBLOND,"servo-shift" steady,in/mm threading, 1982, [22867]
   Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com
 23" x 60" cc, BIRMINGHAM, NEW (NEW) [4173]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 23" x 80" cc, BIRMINGHAM, NEW (NEW) [4174]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
MORI SEIKI, ENGINE LATHE, NEW: 1973 [32017]
   Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com
 23" x 102" DEMOOR, 12" 3-JAW, 16" 4-JAW, TAPER, 7-1/2" STEADY REST, FOLLOW REST [1165]
   Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com
 23"/16" x 132" cc SPRINGFIELD, 1-3/4" Spdl Hole, Taper Attach, 18" 4-Jaw, STK#13857 [30859]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 23"/16" x 132" cc SPRINGFIELD, 1-3/4" Spdl Hole, Taper Attach, 18" 4-Jaw [30859]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 23.6"/13.75" x 5' cc AXELSON, 2-1/4" Spdl Hole, Tool Post, 18" 4-Jaw Chk, 10 HP, STK#11345 [29359]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
24" x 36" cc, Sundstrand,, Sundstrand Production Lathe 24" Sw x 36" CC, Pwr Tail Stk, 2 1/2 Sp Hole, 15 to 750 RPMs, 75 HP Drive Motor [PL 1310]
   A E M Group LLC Greendale WI 414-423-0730 aemgrp@hotmail.com
24" x 48" cc, Monarch,, Mdl 22CM, 400 RPM, Taper Attach, (Greg)
   Haron Metals & Equipment Co Hamtramck MI 313-923-4241 info@haronmachinery.com
24" x 60" cc, LODGE & SHIPLEY, [295972]
   Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com
 24"/16" x 60" cc MONARCH, 2-1/4" Spdl Hole, Threading, 16" 4-Jaw Chk, 7-1/2 HP,STK#14082 [30964]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 24"/16" x 60" cc MONARCH, 2-1/4" Spdl Hole, Threading, 16" 4-Jaw Chk, 7-1/2 HP [30964]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
24"x72" LeBlond Servo Shift FCTRY RAISED 25" Swg Ovr Bed, 76" CC's, 1800 RPM, Taper, EXCELLENT!!!
   Midway Machinery Co Inc Grand Rapids MI 616-608-7606 nutek@triton.net
24" x 77" cc, LeBlond, Servoshift, 27-1080rpm, 14.5" O/Slide, 2 15" Chucks, Good [5887]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
 24"x80" CHEVAILIER, FCL-2480, 20 HP, 40-1800 rpm, 4" Hole, Dynapath Autocon,2001 [1277]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 SUMMIT 24" x 80"B Lathe, NEW (NEW) [5473]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
 24" x 88" cc, LAGUN, Liberty LL-ST-24, 3.15" Bore, 30-1500rpm, 7.5hp, in/mm (NEW) [557]
   Highland Machinery Benton Harbor MI 269-926-9600 sales@highlandmachinery.com
24" x 96" cc, LeBlond Regal, Servo-Shift, 1080 RPM, T.A., 6" Roller S.R., 16" 3-Jaw, 20 HP, 1969
   Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com
AJAX, ENGINE LATHE, NEW: 1980 [31957]
   Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com
 24" x 120" cc, Doria, 36"Over Bed,24" Over Carriage,4" S.H.,220V,1969 [101418]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 24"/32" x 120" cc IKEGAI, Gap Bed Engine Lathe, New 1967. [764]
   North American Machinery Sales Philadelphia PA 800-422-0123 sales@northamericanmachinery.net
 24" x 120" cc, MAZAK, 1975,Hercules Ajax, Gap Bed,Inch/Metric,Taper Attach. [1405]
   Metro Machinery Inc Memphis TN 901-942-3363 sales@metromachinery.com
 24" x 120" cc, MORI SE, MH-3000, 16" CROSS SLIDE, 3" HOLE, STEADY REST, TAILSTOCK, 1982 [7604]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 24" x 120" cc SIRCO,GAP,3 & 4 JAW CHUCKS, STEADY REST,QC TOOL POST [55808]
   Spirit Machinery, Inc. Farmingdale NY 631-249-4444 sales@spiritmachinery.com
 SUMMIT 24" x 120"B Lathe, NEW (NEW) [4905]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
24"x120"cc,Schaerer,10'Hydraulic Tracer,3 Jaw,4 Jaw,Steadyrest,3 3/4"SH,30HP,'60's [101340]
   Nevins Machinery Concepts Inc Brockton MA 508-894-0008
 24" x 120" cc,Summit,4"Hole,36" Gap,MM/IN Thread,Cks,Taper,Rapid Trvs,HDWays, 1987,Exc! [1350]
   Foster Machinery Company Inc Charlotte NC 704-847-9449 sales@fostermachinery.com
 24"/31" x 120" cc, VANGUARD, Gap, 7.5-800 RPM, Inch/mm, Taper, DRO, Chucks, New (NEW) [20023]
   C W Wood Machinery Inc Cincinnati OH 800-745-6008 info@cwwood.com
 24" x 180" cc, GURUTZPE, MDL SUPER M, 12" GAP LGTH, 34" SW IN GAP, 2.75" BORE, IN/MM [8035]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 24" x 200" MEUSER Engine Lathe, Model M-11-5, 2 Steady Rests, 1967 [4581]
   Scott Machinery & Supply Inc Helena AL 205-664-9644 mike@scottmach.com
 24" x 200" cc, meuser, 900 RPM, 3-JAW & 4-JAW CHKS, 2 STEADY RESTS, IN/MM THREADING, 1967 [8024]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
24"x240" LEBLOND, 5 1/8" Hollow Spindle,20 HP, 18 1/2" ocs, Chucks, Steadys,1975 [1327]
   Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com
 24" x 240" cc, Mazak, heavy duty, inch-metric, 12-1200RPM, 4.18" hole, rapid, 20HP [08135]
   Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com
 24" x MEUSER, 37" X 14' MEUSER ENGINE LATHE, 52" SWING IN GAP, 3 15/16" SPINDLE BORE, 35" 4 JAW, TAPER ATTACHMENT [8286]
   Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com
 ACER 24" SERIES LATHES (NEW) [4043]
   A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com
25" x 34"x80",Nardini SZ-2580T,Inch/Metric,18" 3-Jaw,1500 RPM,3.1" Hole,Stdy & Follower Rest,15HP,'89
   Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net
 25" x 54" LEBLOND REGAL ENGINE LATHE [10196]
   Gibbs Machinery Co Warren MI 586-755-5353 sales@gibbsmachinery.com
25"x72" cc,LeBlond Servo-Shift,HD,1300 rpm,Taper,Chuck,Faceplate,Hard ways,30HP,Govt Storage,1952
   Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net
25" x 72" Monarch, 16" SOS, D1-6, 12-1310rpm, 4 jaw chuck, very good [5886]
   Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com
25" x 80" cc, Toolmex (Wafum), #TUR63A, 5-1/2" Sp. Bore, Fr. & Rear 19" Chucks, Taper, 17-1/2 HP, 1979
   Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com
 25" x 96" cc, American, Used American Engine Lathe 25" Swing x 96" cenetrs,15Hp,Threading, 450 Max RPM,Taper,21" 4-jaw [08001]
   Easton Machinery Inc Easton PA 610-253-7141 eastonmachinery@msn.com
 25" x 96" CINCINNATI Engine Lathe, 2-1/4" Hole, 16" 4-Jaw Chuck, Tool Post [42862]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com
 25"/14.75" x 8'6" cc AMERICAN, 2" Spdl Hole, Threading, 18" 4-Jaw Chuck, 15 HP, STK#15170 [31970]
   Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com
 25"/14.75" x 8'6" cc AMERICAN, 2" Spdl Hole, Threading, 18" 4-Jaw Chuck, 15 HP [31970]
   Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com