51 WALCO IN-LINE/BATCH DUAL-ROLLER VINYL APPLICATOR QUOTE# 75C-632
MODEL/TYPE: Dual Roller Vinyl-Paper-Plastic-Adhesive ApplicatorAge: New - 2008
SPECIFICATIONS & DESCRIPTION:
This is a Custom built Dual-Roller designed for In-line or Batch Type Multi-purpose Application of m
terials such as: Adhesives, Plastics, Vinyls, Paper, Tapes, etc onto a single side of the flat sheet
product or coil (for continuous coil fed type operation) and has an automatic cut-off type knife to
ut the vinyl film which separates multiple parts in a continuous feed thru operation. The machine is
designed for programmable cycle operation via a PLC device. (Note the PLC device is not inclu
ed with this unit). It is designed for use either as an
In-line component of an existing coil line for continuous production or as a single shee
batch feed machine that is manually fed by the operator. There is no entry or exit feed equipment i
cluded with this machine.
Basic principle of operation: (1) Roller feeds the incoming sheet to the coater rolls while the seco
d feed roller pulls the completed-coated sheet thru the machine immediately following the automatic
ut-off device cuts the vinyl film that separates the second, third, etc parts.
General Machine Specifications & Description:
Product capacity:up to 51 Wide max x unlimited length
Dual-Roller application rolls
Pinch rolls pull the work into the machine
Pressure on the feed rolls and coating rolls is adjustable
Application Materials: The machine typically applies an materials such as:
Adhesive- Vinyl Tape Plastic Paper, etc to metal, glass, Plastic, Vinyl, etc.
Presently it is set-up as follows: The coater applies a vinyl tape to the metal coil, cut the tape c
eating part sections, then repeat the step to the next section of the coil This operation was
an in-line operation incorporated into an existing continuous coil processing line.
to complete inventory display
to our home page