|
MODEL/TYPE: 'Horizon' series Monorail Powder Line
AGE: 1995
SPECIFICATIONS & DESCRIPTION:
System specs: Line Speed: 8 FPM - Work Ware: 36" W x 55"-80" H x 96"L,
Line speed: approx 8 FPM
Approx System footprint: 5'W x 150'L, Pre-treatment: 5-Stage washer
/ Separate Dry-Off & Bake Ovens
Choice of Available Nordson Powder booths w/ automatic & manual guns &
an Overhead monorail system
Description of components: 5-Stage Industrial washer /
All Stainless Steel Construction
Overall Dimensions: 76'L x 7-1/2'W x 10'H - Straight thru design
Air Curtins & Vestibules - both ends
Stage 1: 10' Wash zone - Heated phos wash / Immersion fire-tube
- gas fired 7.5 HP Vertical gusher pump
Stage 2: 6' Ambient rinse zone - 5 HP Vertical gusher type pumps
Stage 3: 8' Heated Iron Phos wash - 7.5 HP Vertical gusher type pumps,
Immersion -fire-tube, gas fired
Stage 4: 4 Ambient rinse zone - 5 HP Vertical gusher type pump
Stage 5: 4' Ambient Seal - final Rinse - 5 HP Vertical gusher type pump
Construction: welded Stainless Steel construction throughout - 7' long
drains through,
Components & Accessories: Maxon type Burners (stages: 1, 3)
CPVC Risers, Nylon nozzles, SST piping
Heating Section: Separate Dry-Off & Cure Ovens: Gas
- fired: 4" Thick Panels, air curtins, both ends
Dry-Off oven: Approx. Chamber size: 5' W x 70' L
- Straight thru Dry Off Tunnel - gas operation
Bake-curing oven: Approx. chamber dimension: 20' W x 60'L x 8'H
- side mounted burner box
(1) 20'w x 70' L x 8'H - 2 million BTU burner - recirculated Hot air
- rated @ 500F temp:
Layout design 4 - pass conveyor path / Recirculation blower
- Air curtins at exit/entrence -
cure cycle: 15-25
minute cure depending on set line speed / Heating system convection,
recirculated Hot air / 54000 CFM
Monorail system: Jarvis-Webb enclosed track overhead monorail conveyor
- approx 500' OAL
Note: The conveyor system will be confirured to the purchaser's actual
layout plan, the line will include:
(1) vari-speed drive unit, (1) take up unit, various turns, supports,
chain and trolleys and chain oiler
& cleaner units
Coating Equipment: There are (2) Nordson Powder Booth options
available:
Customer's choice of either
(1) Nordson Model CK-3 Cyclone quick color Change series or
(1) Nordson Model 400 Horizon series, both set-up for auto & manual
spray
These are booth 'Roll-in - Roll out' type booths -
Powder Booth Options:
(1) Nordson 'CK' series Booth - Cyclone type design - quick color
change booths, no cartridge required!
Footprint Dimensions: approx 12'W x 28' OAL each - designed for
automatic and manual spray application
Entrance & exit Vestibules at each end - operator work platform
OR
(1) Nordson 'Horizon 400' series Booth - cartridge type, down draft
design: designed for auto and manual spray
Equipped with one color module and separate feed seive
- equipped with auto & manual guns, entrance &
exit Vestubules, Approx footprint dimensions: 12'W x 28' OAL
Application equipment: Each booth includes one LOT of powder spray guns
as follows:
(6) Nordson Versa-Spray II Automatic guns, (2) Sure-coat Manual guns,
gun controls for each, lines & cables, and various related accessories,
seives and a fire suppression device
CONDITION: Equipment is in very good condition - Recently removed from
production and placed in storage. Equipment is offered in good
operating condition, dismantled where necessary and will be loaded on
board purchaser's trucks. Available for immediate release -
LOCATION: Wisconsin plant - near Milwaukee
RETURN
to complete inventory display
RETURN
to our home page