Product Ware Size: 36"W x 60"H x 72"L & Line speed: 6-8 FPM -
Production Type Paint/Finishing System
which includes: 3-Stage Poly Washer, Dry-Off /Bake Combi-Oven,
Enclosed Track Overhead Monorail Conveyor
& Nordson Versa-Spray Auto-Manual Powder Booth
- components are late 1990's

SPECIFICATIONS AND DESCRIPTION:

Pretreatment 3-Stage Industrial washer/Poly:
OAD: approx: 35'L x 8' W x 11-1/2'H - Straight thru design
Stage 1: 9' wash zone - heated phos wash @ 150 degrees F,
10 risers / 120 nozzles / 90 seconds
2.5 M BTU Burner - 10 HP pump, gusher type,
approx 1000 gallon tank capacity
Stage 2: 4' Ambient rinse zone - 5 risers / 60 nozzles / 60 seconds
- 5 HP pump, approx 500 gallon tk
Stage 3: 3' Ambient rinse-seal - 4 risers / 52 nozzles / 36 seconds
- 5 HP pump, approx 400 gallon tk
Construction: Poly tanks & upper housing, Air Curtins/both ends,
PVC risers & piping,
Components & Accessories: Gusher type vertical pumps,
Exhaust fan rated @ apprix 4500 CFM

Heating Section: Dry Off /Bake Oven/Combi Oven: - Gas
- 4" Aluminized Steel Panel construction
Dry-Off section: Approx OAD: 20' L x 12'W x 8'3"H Heat from Bake oven
Single Pass - straight thru Dry Off tunnel
Tunnel Dimensions: 36"W x 48"H (mounted on 30")
Bake Section: 3-Pass
Approximate dimensions: 12' W x 40'L x8' OAH
20 minutes dwell @ 6 FMP
2.5 million BTU Burner system, 40000 CFM recirculation, 1800 CFM
exhaust blower, 400F cure temp.
3- pass design layout - 40 HP Recirculation blower
- Air curtins at exit/entrence, Honeywell controls-

Application Equipment: Nordson Versa-Spray Auto-Manual Powder Booth
w/Entrance-Exit Vestibules
Approximate overall dimensions: 5'W x 10'L x 9'4" OAH,
Straight thru design - rated @ 3300 CFM
Construction: SST floor & sides, Lenax top,
2 manual spray openings: 3' x 3-1/2'H, side mounted cartridge
(6) Auto guns w/gun mounts (1) manual hand gun, power packs, cables,
hoppers and controls

Monorail system: Enclosed track - OEM: Richard Wilcox or similar
- 4-500' OAL / Layout as specified
Hook centers: 12" - AC Variable speed drive - pneumatic take-up unit,
Oil Lubricator unit
Operator control unit - 90 degree turns, conveyor chain w/attachments
- Floor Standing support system

CONDITION: Components are all in very good condition
- custom remanufactured and tested.
Components will be prepared for easy re-assembly at the
user's site: ‘kit-formed’

LOCATION: Wisconsin plant, near Milwaukee, ready for release -

RETURN to complete inventory display       RETURN to our home page