0L3000 LATHES, ENGINE_See also other Lathe Categories
13" HARRISON, M300, 3 HP, 4" camlock Our reference: 4294

Standard machine with 25" centers and standard accessories. . . . . $17,800.00
Standard machine with 40" centers and standard accessories. . . . . 18,800.00

STANDARD EQUIPMENT FURNISHED
Round toolpost, 7" drive plate, Thread chasing dial, Bed wipers,
Center sleeve and two (2) #3MT centers, Parts and instruction manual
Full length rear splash guard, Set of drive belts, Set of wrenches
Headstock hinged plexiglass chip guard, Accuracy test chart
Gap standard with left-hand apron handwheel

OPTIONAL ACCESSORIES:
Apron handwheel dial--inch graduations. . . . . . . . . . . . . . . $ 725.00
Telescopic taper attachment--10" max. turning length, 20 degrees
max. included angle. . . . . . . . . . . . . . . . . . . . . . 1,760.00
High speed threading attachment for American (inch ) threads
factory installed only . . . . . . . . . . . . . . . . . . . . P.O.R.
"Metra Dial" thread indicator dial to allow disengagement of
half nuts while cutting certain metric threads . . . . . . . . 1,165.00
Motor drive coolant system, installed . . . . . . . . . . . . . . . 750.00
Steady rest, 0-4" capacity. . . . . . . . . . . . . . . . . . . . . 490.00
Steady rest, 3"-7" capacity . . . . . . . . . . . . . . . . . . . . P.O.R.
Follow rest, 0-2" capacity. . . . . . . . . . . . . . . . . . . . . 340.00
Micrometer carriage stop. . . . . . . . . . . . . . . . . . . . . . 340.00
Dial indicator carriage stop--1 inch. . . . . . . . . . . . . . . . 375.00
Dial indicator carriage stop--2 inch. . . . . . . . . . . . . . . . 415.00
Five position carriage stop assembly. . . . . . . . . . . . . . . . 810.00
12" diameter face plate, D1-4 direct mount. . . . . . . . . . . . . 670.00
18" diameter face plate (for use in gap on gap model lathes). . . . 900.00
PBA 6" diameter precision 3 jaw universal chuck with two piece
reversible jaws and hardened and ground scroll . . . . . . . . 1,250.00
Soft blank top jaws for 6-1/4" chuck (set of 3) . . . . . . . . . . 135.00
8" diameter precision 4 jaw independent chuck, Meehanite body
with forged steel solid reversible jaws. . . . . . . . . . . . 1,040.00
Plexiglass chip guard for saddle mounting . . . . . . . . . . . . . 800.00
Quick change toolpost set including following holders:
(1) turning and facing, (1) turning, facing and boring,
(1) heavy duty boring, (1) universal parting and
(1) threading. . . . . . . . . . . . . . . . . . . . . . . . . 865.00
Draw-in collet attachment for 1-1/16" capacity 5C collets,
handwheel type . . . . . . . . . . . . . . . . . . . . . . . . 515.00
Lever operated production type draw-in collet attachment for
5C collets . . . . . . . . . . . . . . . . . . . . . . . . . . 1,080.00
Sjogren front mounted 5C collet chuck, handwheel type . . . . . . . 1,600.00
Round 5C collets, 1/8"--1-1/16" round (any fractional size) . . .ea 40.00
Collet rack for 16 5C collets for mounting on rear splash guard . . 135.00
1/2" capacity drill chuck, #3 MT for tailstock. . . . . . . . . . . 220.00
3/4" capacity drill chuck, #3 MT for tailstock. . . . . . . . . . . 250.00
Anti-friction revolving tailstock center, #3MT. . . . . . . . . . . 280.00
Machine light . . . . . . . . . . . . . . . . . . . . . . . . . . . 185.00
Inland freight to Miami, Fl approximatley . . . . . . . . . . . . . 500.00
CAPACITIES:
Center height 6-9/16" (167mm)
Swing over bed 13" (330 mm)
Swing over cross slide 8-1/4" (210mm)
Swing over gap 19" (480mm)
Length of gap in front of faceplate 4-39/64" (117mm)
Distance between centers 25" or 40"
Hole thru spindle--bored to pass 1-1/2" (38mm)
Spindle nose type D1-4 camlock
Taper in headstock bushing #3 MT
Width of bed 8-1/8" (206mm)
Spindle speeds--number 12
Spindle speeds--range 40 to 2500 rpm
Cross slide travel 7-1/2" (190mm)
Cross slide width 5-1/2" (140mm)
Top slide travel 3-5/8" (92mm)
Top slide width 3-1/4" (82mm)
Tool--maximum section 5/8" x 3/4" (16 x 20mm)
Threads per inch--number 52
--range 2 to 56 TPI
Metric threads--number 45
--range 0.2 to 14 mm
Diametral pitch--number 18
--range 8 to 56 D.P.
Module pitch--number 18
--range 0.3 to 3.5 MOD
Longitudinal feeds--number 21
--range (ipr) .001" to .080"
--range (mm/rev) .03 to 2 mm
Cross feeds 1/2 of longitudinal
Leadscrew diameter 1-1/8" (28mm)
Leadscrew thread pitch 4 TPI
Tailstock quill diameter 1-21/32" (42mm)
Tailstock quill travel 4-3/8" (110mm)
Taisltock quill center #3MT
Tailstock set-over +/- 0.5" (+/-12mm)
Main drive motor 3 HP (2.2 kw)
Electrics 230/460/3/60
Weight, approximate 1,288 or 1,597 lbs

MACHINE FEATURES:
All geared headstock with Reischauer ground precision gearing
and oil bath lubrication system
GAMET ultra precision spindle spindle bearings
12 spindle speeds from 40 to 2500 RPM
Spindle bored to pass 1-1/2" diameter
Foot operated spindle brake
Totally enclosed quick change gearbox with oil bath for
inch/metric threading
Leadscrew for threading with exclusive torque limiting device
to prevent overload damage to gearbox
Storage compartment with lock and key
One shot lubrication system for cross slide and carriage wings
Independent feed rod with safety slipping overload clutch for
driving longitudinal and cross feeds
Full length cross slide with direct diameter reading micrometer dial
Anti backlash cross slide nut
Double wall apron with hardened gears and self-contained lubrication
Non-rotation safety provision for apron handwheel
Induction hardened bedways
Tailstock with micrometer dial on handwheel, graduated spindle
and lever locks
Steel cabinet with built in chip pan

ELECTRICAL EQUIPMENT FURNISHED:
3HP TEFC reversible motor drive complete with 115 volt control circuit;
Magnetic starter with unfused safety disconnect line switch; Internal
circuit breaker protection, fail safe provision in case of power
interruption; Current-On light; Emergency stop button; and electrical
Cut out switch activated by end gear guard. Electrical equipment and
wiring comform to National Electrical Code and NFPA Electrical Standard
No. 79 for Metal Working Machine Tools.

Return to Menu (Use your BACK function to return to previous screen.)